Polymer Products
Polymer Products
Products and Capabilities
Rulon® Basic Shapes
Rulon BasicShapes

Basic and stock shape RULON® materials are produced by a variety of processing methods to produce thick and thin-walled shapes to exacting standards. Saint-Gobain prepares and provides standard fabricated RULON materials in a variety of shapes including sheets, rods, tapes, and tubes. These semi-finished stock shapes can be used to produce a variety of finished goods by being cut, turned, planed, milled, drilled, and stamped easily on standard woodworking or metalworking machines.


ShapesBasic and stock shape RULON® materials are available in standard sizes. Custom sizes can be quoted upon request.

 

 

Rulon® Extruded Rod Stock

Outer Diameter0.1875" to 1" (4.75 mm to 25.4 mm)
Ground tolerances as fine as +/-0.001" (0.025 mm)
1.125" to 2" (28.58 mm to 50.8 mm)
Ground tolerances as fine as +/-0.002" (0.05 mm)
Lengths3' (0.915 m) up to 12' (3.66 m) for smaller diameters

Rulon® Extruded Tube Stock

Standard Sizes
(Inner Diameter x Outer Diameter)		0.250" x 0.500" to 1.250" x 2"
(6.35 mm x 12.7 mm to 31.75 mm x 50.8 mm)
Ground TolerancesAs fine as +/-0.001" (0.025 mm) for 1" (25.4 mm) OD; and as fine as +/-0.002" (0.05 mm) for up to 2" (50.8 mm) OD

Rulon® Sheet Stock

Standard Sheet Sizes
 		24" x 24" (609 mm x 609 mm)
12" x 12" (304 mm x 304 mm)
6.5" x 6.5" (165 mm x 165 mm)
Thickness0.250" to 2" (6.35 mm to 50.8 mm)
Length Tolerance+/-0.125" (3.175 mm)
Thickness Tolerance+0.010 (0.254 mm)

Rulon® Tape Stock

Thickness0.002" to 0.260" (0.05 mm to 6.6 mm)
Standard Widths6" to 12" (152 mm to 304 mm) with some grades to 38" (965 mm)
Width Tolerances+/-0.015" (0.38 mm) at 6" (152 mm)
+0.0625" (1.58 mm) at 12" (304 mm)
Thickness Tolerances+/-0.0002" (0.005 mm) for thin tape to +/-0.010" (0.254 mm) for thicker tape